Lenovo ThinkServer TS150 User Manual And Hardware Maintenance Manual Download Page 40

Page: 40 / 148

The Setup Utility program main interface consists of the following menus:

•

“Main menu” on page 26

•

“Devices menu” on page 26

•

“Advanced menu” on page 26

•

“Power menu” on page 26

•

“Security menu” on page 27

•

“Startup menu” on page 27

•

“Exit menu” on page 28

Main menu

After entering the Setup Utility program, you can see the

Main

menu. The menu lists basic information about

your server, such as the BIOS, CPU type, memory, and system date and time.

Devices menu

You can view or change various device settings on the

Devices

menu in the Setup Utility program. Some

items are displayed on the menu only if the server supports the corresponding features.

The

Devices

menu contains the following items.

Menu item

Description

Serial Port Setup

View and set serial port configuration parameters.

USB Setup

View and set USB configuration parameters.

ATA Drive Setup

View and set SATA storage drive configuration parameters.

Video Setup

View and set the primary video adapter type.

Audio Setup

Enable or disable the onboard audio controller.

Network Setup

Enable or disable the onboard Ethernet controller and other network features.

Advanced menu

You can view or change various server component settings on the

Advanced

menu in the Setup Utility

program. The

Advanced

menu contains various configuration items. Some items are displayed on the menu

only if the server supports the corresponding features.

The

Advanced

menu contains the following items.

Menu item

Description

CPU Setup

View information about the installed CPU and set CPU configuration parameters.

Intel

Manageability

View and set Intel Manageability configuration parameters.

Intel SIPP Support

Enable or disable the Intel SIPP Support feature.

CPU CRID Support

Enable or disable the CPU CRID Support feature.

Chipset CRID support

Enable or disable the Chipset CRID Support feature.

Power menu

You can view or change server power options on the

Power

menu in the Setup Utility program.

ThinkServer TS150 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer TS150





















































































































































Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands

Lenovo ThinkServer TS150, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands