Lenord, Bauer GEL 8310, Operating Manual, Page: 153 / 226

S
TORAGE LOCATIONS FOR MACHINE PARAMETERS
A-19
8310/8610-8
3. Axis parameters (3rd level)
3 1 Encoder Actual value adjustment
Specification of the used encoder and setting of the edge evaluation of the 0° and
90° tracks at the count input and the coding of the connected encoder (refer also to
section 5.2)
0 incr. x1 incremental encoder with 1-fold edge evaluation (nominal
pulse number)
1 incr. x2 incremental encoder with 2-fold edge evaluation (double
nominal pulse number)
2 incr. x4 incremental encoder with 4-fold edge evaluation (quadruple
nominal pulse number)
3 Gray absolute encoder, Gray code
4 /Gray parallel absolute encoder, Gray code with logic reversal
5 binary parallel absolute encoder, binary code
6 /binary parallel absolute encoder, binary code with logic reversal
7 BCD parallel absolute encoder, BCD
8 /BCD parallel absolute encoder, BCD with logic reversal
9 SSI 25b 25 bits multi-turn absolute encoder with serial data output
Gray code, refer to storage location 3/54
10 SSI 13b 13 bits single-turn absolute encoder with serial data output,
Gray code, refer to storage location 3/54
3 2
Directio Count direction
Inverting of actual value counting direction
WARNING
It is mandatory to read sections 5.4 and 4.1.3 before performing any
changes!
0 no rever no reversal of the count direction
1 reversal
reversal of the count direction