Lenord, Bauer GEL 8310, Operating Manual, Page: 113 / 226

T
ROUBLE SHOOTING
6.1 Warning and error messages
6-7
8310/8610-8
Warning or error
message
Cause, situation Remedy, reaction
Memory overflow All nominal value storage
locations are already used.
Occurs
−
after entering the last
possible nominal value
when trying to insert an-
other sentence or to copy
several sentences in the
insert mode
−
after trying to create a new
program if there is no
space left for at least two
sentences
Define the end of program
in the actual program
(°+9
resp.
K)
;
if required, delete sen-
tences in another program
in order to free-up new
memory space
Only for s. begin
at the beginning of the
sentence only
For a sentence already
begun, i.e., starting with the
second or a further nominal
value in the actual sentence,
you tried
−
to define the end of
program
(°+9
resp.
K)
, or
−
to set a program flow
instruction at this position
(°+1
…
°+4)
First, enter the remaining
nominal values of the
actual sentence
Only in reset
in reset state only
You tried
−
to copy sentences
(°+8
resp.
C)
or
−
to delete
(°+#
resp.
L)
or to insert a
sentence
(°+;
resp.
R)
−
to read data from the
memory card
(°+;
resp.
<)
although there is still at least
1 unit in the started or inter-
rupted state
Reset the Controller for all
units