Lenord, Bauer GEL 8310, Operating Manual, Page: 114 / 226

6-8
6.1 Warning and error messages
T
ROUBLE SHOOTING
8310/8610-8
Warning or error
message
Cause, situation Remedy, reaction
Over 999 sentence
•
998 sentences have
already been programmed
(the end of program does
also count as a sentence)
and you now tried to enter
another nominal value or to
insert a sentence
Terminate the program
•
When copying in the insert
mode, too many sentences
have been selected so that
the sum of the sentences
existing and still to be
copied would exceed the
value 998
Reduce the number of
sentences to be copied
Param. error
parameter error
An inadmissible value has
been entered for a machine
parameter
(occurs when trying to exit
the programming mode of
machine parameters)
Confirm the message with
;
; the invalid parameter
is activated and can now
be corrected
If the message is acknowl-
edged with (e.g.)
`
, i.e.
ignored, no unit can be
started and the programm-
ing mode of nominal values
cannot be activated. In
such a case, change an
arbitrary parameter, save it,
and exit the programming
mode. Then, the invalid pa-
rameter will be indicated
again.
Parkpos. too high
parking position is too high
Input monitoring:
value of parking position
exceeds the specified »Pos.
max« value (storage location
3/72) Enter a lower value or
specify »Pos. max« new
Parkpos. too low
parking position is too low
Input monitoring:
value of parking position is
lower than the specified
»Pos. min« value (storage
location 3/71) Enter a higher value or
specify »Pos. min« new