Lennox ROOFTOP FLEXY FXK 55, Installation, Operating And Maintenance Manual

Page: 4 / 106

IMPORTANT NOTICE – Safety instructions
FLEXYII_WSHP-IOM-1307-E - 2 -
The present manual applies to the following ROOFTOP versions:
FCM 85 - FCM 100 - FCM 120 - FCM 150 - FCM 170 - FCM 200 - FCM 230
FHM 85 - FHM 100 - FHM 120 - FHM 150 - FHM 170 - FHM 200 - FHM 230
FDM 85 - FDM 100 - FDM 120 - FDM 150 - FDM 170 - FDM 200 - FDM 230
FGM 85 - FGM 100 - FGM 120 - FGM 150 - FGM 170 - FGM 200 - FGM 230
FWH 85 - FWH 100 - FWH 120 – FWH150 – FWH170
FWM 85 - FWM 100 - FWM 120 – FWM150 – FWM170
FXM 25 - FXM 30 - FXM 35 - FXM 40 - FXK 55 – FXM 70 - FXM 85 - FXM 100 - FXM 110 - FXM 150 - FXM 170
NOTES FOR UNIT FITTED WITH GAS BURNER:
THE UNIT MUST BE INSTALLED IN ACCORDANCE WITH LOCAL SAFETY CODES
AND REGULATIONS AND CAN ONLY BE USED IN WELL VENTILATED AREA.
IF MACHINE IS INCLUDING GAZ BURNER, MINIMUM CLEARANCE AROUND THE
UNIT MUST BE AT LEAST 8 M TO ALLOW A PROPER GAZ FLUE DILUTION. IF NOT
POSSIBLE, THE FRESH AIR INTAKE MUST BE DUCTED AT LEAST 8 M AWAY
FROM THE GAS BURNER EXHAUST.
PLEASE READ CAREFULLY THE MANUFACTURER’S INSTRUCTIONS BEFORE
STARTING THIS UNIT.
Switchgear must be installed on each unit in accordance with the Machine
Directive and the standard NF EN 60204.
THIS MANUAL IS ONLY VALID FOR UNITS DISPLAYING THE FOLLOWING
CODES:
GB IR GR DA NO FI IS
In case these symbols are not displayed on the unit, please refer to the technical
documentation which will eventually detail any modifications required to the
installation of the unit in a particular country.
All the technical and technological information contained in this manual, including any drawing and technical descriptions
provided by us, remain the property of Lennox and must not be used (except in operation of this product), reproduced, issued
to or made available to third parts without the prior written agreement of Lennox.
The technical informations and specifications contained in this manual are for reference only. The manufacturer reserves the right to modify
these without warning and without obligation to modify equipment already sold.