Leach 2R-III, Maintenance Manual

Page: 115 / 168

Service & Repair 105
3.
Secure chains or a sling to the upper and lower end of the carrier panel. Attach the other end to a
suitable lifting device with a minimum lifting capacity of 1600 lbs (726 kg). Adjust the hoist so
that it will support the panel once the roller assembly and pivot pin are removed, but not so tight
that it changes the
position of the carrier panel.
N
OTE
:
See Chapter 3 General Repair Practices for more detailed information about the correct use of
slings and lifting chains.
4.
Once the carrier panel has been securely supported, remove the roller assemblies from each side
of the tailgate through the open upper track holes. Remove the split image pin that retains the
roller pivot
and remove the roller shaft bushings.
OPERATIONAL STATUS
Truck Off PTO Disengaged
CARRIER
PANEL
LEVER