Leach 2R-III, Maintenance Manual

Page: 90 / 168

80 Troubleshooting
Linkage binding or restrictive Repair or replace linkage as required.
Lifting motor or cylinder(s) by-passsing
hydraulic fluid Repair or replace the defective component.
Shear pin or key broken between winch
shaft and drum Replace the key or pin.
WINCH MOTOR LEAKING
Possible cause Remedy
Shaft seal damaged Replace shaft seal.
Motor worn internally Replace motor.
CONTAINER RAISES VERY SLOWLY
Possible cause Remedy
Winch motor by-passing Repair or replace motor.
Rear loader hydraulic system not
providing sufficient flow rate or pressure
for container handling systems Check and repair rear loader hydraulic system
following procedures in Service Manual.
CONTAINER WON’T LIFT
Possible cause Remedy