Leach 2R-III, Maintenance Manual

Page: 130 / 168

120 Service & Repair
Replacement wear shoes should be installed with the original shims or the same amount of new
shims (see Wear Shoe Adjustment on page 120). A grease fitting should be installed in the
replacement wear shoe.
7.
Repeat Step 1 to determine if additional shims are required (see
Wear Shoe Adjustment
on
page 120).
8.
Once alignment is correct, lubricate each wear shoe.
9.
Using the capscrews (1), lockwashers (2) and spacers (3) secure the cover weldments (4) over
the four track holes.
Wear Shoe Adjustment
N
OTE
:
This section only applies to trucks equipped with the optional carrier panel wear shoes instead
of rollers.
OPERATIONAL STATUS
Truck Running PTO Engaged Speed Up On Transmission Neutral
Caution! Do not overshim wear shoes. Excessive shimming may damage the tailgate walls or
prematurely wear the track channels.
OPERATIONAL STATUS
Truck Off PTO Disengaged
1
2
3
4