- 97 -
Spirit GE User Manual
The maximum diameter and length of the to-be-engraved object is 90mm and 450mm
respectively. Its maximum weight should not exceed 7kg.
Chapter VIII Basic Maintenance
Keeping your LaserPro Spirit GE clean and well maintained will ensure quality output, consistent reliability,
and extended product life. Smoke, dust or residue build-up inside the laser system or the mechanical
components can cause a reduction in the laser power, irregularities in the motion system, reduced
product life cycle, and a host of other avoidable problems. This section will cover how to perform regular
maintenance on the Spirit’s worktable, motion system, mirrors, and focal lens.
The frequency of the cleaning schedule will depend on number of variables such as the types of material
you work with, the immediate work environment, the frequency of use, the quality of the exhaust system,
etc.
WARNING
•
Electrical Shock may occur if you do not turn off and unplug the Spirit GE before
cleaning.
•
Damage may occur to the system if you do not turn off and unplug the Spirit GE
before cleaning.
