Spirit User Manual
- 42 -
Set Table Down Page
The Set Table Down Page allows you to select whether or not the LaserPro Spirit GE displays a
warning prompt at startup. If the Table Down selection is set to <YES>, the LaserPro Spirit GE
will display a “Table will move down and remove objects on table” warning prompt on startup.
Pressing the Enter key at this point will confirm the prompt to move the work table to its lowest
position. If the Table Down is set to <NO>, then the LaserPro Spirit GE will not display this
warning prompt at system startup.
Table Down: YES / NO
Distance: 0 - 165 mm
Set Table Down Page
Relevant Buttons
Function
F1 (Back)
Back to previous page
F4 (Save)
Save your current settings
U
/
V
Directional
Scroll through the menu selections
Y
/
Z
Directional
Adjust the value for that selection
Start / Stop
Back to Main Work Page
Auto Focus
Initiate the auto focus function
▲
/
▼
Manual Focus
Buttons
Manually adjust the height of the work table (Z-
axis)
Main Work Page
Press
F4
☼
Navigating to this page:
Functions Page
Select <
Machine Setting
>
from the menu
Machine Setting Page
Select <
Set Table Down
>
from the menu
Set Table Down Page