Spirit User Manual
- 49 -
Set Vector Mode Page
The Set Vector Mode Page allows you to adjust and balance vector mode’s quality and speed
settings based on your specific job. Speedy Vector Mode offers the highest output speed,
sacrificing quality. Whereas Quality Vector Mode offers the highest quality, sacrificing output
speed. Keep in mind that speed and quality are usually at a tradeoff. The system’s default is Fine
Vector mode, sacrificing some speed for higher quality. The LaserPro Spirit GE’s default setting is
<Fine Vector>.
Modes: Quality Vector, Fine Vector, Coarse Vector, Speedy Vector
[
Slower speeds / higher quality -------------------- Faster speeds / lower quality
]
Set Vector Mode Page
Relevant Buttons
Function
F1 (Back)
Back to previous page
F4 (Save)
Save your current settings
Y
/
Z
Directional
Cycle Set Vector Mode between QUALITY
VECTOR / FINE VECTOR / COARSE VECTOR /
SPEEDY VECTOR
Start / Stop
Back to Main Work Page
Auto Focus
Initiate the auto focus function
▲
/
▼
Manual Focus
Buttons
Manually adjust the height of the work table (Z-
axis)
Main Work Page
Press
F4
☼
Navigating to this page:
Functions Page
Select <
Machine Setting
>
from the menu
Machine Setting Page
Select <
Set Vector Mode
>
from the menu
Set Vector Mode Page
