- 94 -
Spirit GE User Manual
8) Connect one end of the included air tube C to the right-side opening of the air tube connector
(opened in step 6) and connect the other end of air tube C to the original laser carriage’s air
tube location. (Removed in step 7).
9) Congratulations! Your dual-head is now properly installed and ready for use as shown in the
following photo.
OPERATION:
1) With the dual-head installed, go to the Paper Page of the Spirit GE print driver
and check the Dual Head box. This will shrink the X (width) value of the paper
size from 64cm to 37cm, to accommodate for dual engraving jobs. Note the Y
(height) value remains the same.
NOTE
Please refer to section 5.2 of the reference manual for complete instructions on how to
use the Spirit’s Print Properties.
2) Simply lay out your work on a maximum page size of 31cm x 46cm. Prepare your work as if
you were making only a single piece, the laser system and dual-head will take care of the
duplication process automatically.
3) You are now ready to begin your dual engraving process.
7.8 Rotary Attachment Option
The rotary attachment option provides the Spirit GE with the ability to engrave on cylindrical or
spherical objects. In addition to the standard X, Y, Z axis, the rotary attachment allows for a fourth
axis which rotates your object 360° to allow for engraving on cups, wine glasses, and even balls.
