LTI TruPoint 200h User’s Manual • Section 7 - Targeting Menu
Page 60
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Timer
The Timer delays measurement and is a single shot. The Timer can work with Functions, but cannot
work with any other targeting modes
The Timer icon
is displayed in the upper right in the main measurement screen when selected.
Indicating the timer is in stand-by mode
1.
Short press the
button. Use the
and
buttons to the to highlight t
he Timer Icon
.
2.
Press the
button to select the timer function.
3.
Use the
and
buttons to select the desired timer value in seconds and
press the
button to return to the Measurement screen with the Timer icon active.
•
Press the Left Soft Key
to go back to Target menu with no change to the timer.
•
Press the right soft key
to exit to the Measurement screen with no timer active.
4.
Press the
button to activate laser pointer, then press
again. The selected
time (0, 3, 5, 10, 20, 30 seconds) will be displayed under the Timer icon and count
down to zero and take a measurement.
About the timer:
•
It is updated at least once a second.
•
It displays the number of seconds until the measurement
will be taken.
•
Once the timer reaches zero, the TruPoint measures to
the target with a single shot and the values are displayed.
**Draft B**
