LTI TruPoint 200h User’s Manual • Section 5 - Function Menu
Page 53
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Min/Max Routine
In Min/Max mode, you “sweep” the laser point into a corner. The longest measurement is recorded.
Very useful for accurate diagonal room or window/door measurements. Best used in the Horizontal
Orientation using the LCD to review measurement results.
1.
Short press the
button and use the navigation buttons to highlight the Min/Max
icon.
2.
Press the
button enter the Min/Max measurement routine.
3.
Select the first target and press the
button, the laser pointer is active and the laser
indicator
will be displayed when the pointer is on. Aim the laser pointer to the target.
4.
Press-and-hold the
button to measure to the target, then pan to a new target.
The minimum and maximum targets measured will be displayed.
Button sequence during the Min/Max routine:
•
Pressing the back key
clears the last measurement
and allows you to reshoot that measurement.
•
Pressing the
button soft key, it will exit the function
and goes to main measurement screen.
•
Press the
button to clear last measurement and
to re-shoot the previous point.
•
When the measurement result is displayed, just press
the
button to start the routine and repeat the steps.
**Draft B**
