manualshive.com logo in svg

Laser Technology TruPoint 200h, User Manual

Share
Download
Laser Technology TruPoint 200h User Manual Download Page 23

LTI TruPoint 200h User’s Manual • Section 3 - Basic Operations

 Page 21

Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.

Icon display location summary in Horizontal LCD Mode:

Icon highlights:

N/A

Although the TruPoint 200h does not use this indicator, 
it does appear during the Display Indicator Test.

N/A

Although the TruPoint 200h does not use this indicator, 
it does appear during the Display Indicator Test.

Icon

Location

Farthest, Closest, Filter, Continuous Timer

TOP right

Range Gate, Battery, Rotation Lock

Lower Status Line

Icon Highlights

Explanation

White background

The icon is not selected.

Grey background

The icon is selected and active.

White background with outer frame

The icon is highlighted and will be 

selected if you press the 

 button.

Grey background with outer frame

The icon is selected and highlighted by 
the active cursor.

Main

Display

HUD

Description

Meaning

**Draft B**

Summary of Contents for TruPoint 200h





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands