manualshive.com logo in svg

Laser Technology TruPoint 200h, User Manual

Share
Download
Laser Technology TruPoint 200h User Manual Download Page 28

LTI TruPoint 200h User’s Manual • Section 4 - Settings Menu

 Page 26

Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.

Wireless (Bluetooth)

Bluetooth wireless technology is an industry standard specification for short-range wireless 
connectivity. As a short-range radio link, Bluetooth replaces cable connections between devices 
allowing you to download measurement data to any Bluetooth device. 

1.

Long press the 

 button and use the 

 and 

 buttons to highlight the Wireless 

Bluetooth icon 

, BLUETOOTH will be displayed in the lower message area. 

2.

Press the 

 button to toggle Bluetooth from Off/On BT/ON BLE

3.

Press the Left Soft Key 

 to return to the main measurement screen. This does not 

select an option and exits without saving the Bluetooth setting option. The unit will 
return to the last saved option. 

4.

Press the Right Soft Key 

 to accept Bluetooth setting option and exit to the main 

measurement screen. The TPt200h is ready to connect to a device. 

 Figure 19

•

OFF

: Turns the Bluetooth communications OFF.

•

ON BT

: Turns the Classic Bluetooth 

communications ON.

•

ON BLE

: Turns the BLE Bluetooth 

communications ON. Connectivity for 
Smart Devices.

**Draft B**

Summary of Contents for TruPoint 200h





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands