LTI TruPoint 200h User’s Manual • Introduction
Page 3
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Introduction
•
The safety instructions and the user manual should be read through
carefully before the product is used for the first time.
•
The person responsible for the product must ensure that all users
understand these directions and adhere to them.
•
The symbols used have the following meanings:
•
WARNING
Indicates a potentially hazardous situation or an unintended use which,
if not avoided, will result in death or serious injury.
•
CAUTION
Indicates a potentially hazardous situation or an unintended use which,
if not avoided, may result in minor injury and/or appreciable material,
financial and environmental damage.
•
(!)
Important paragraphs which must be adhered to in practice as they
enable the product to be used in a technically correct and efficient manner.
Precautions
Laser Classifications: the TruPoint 200h is designed with two different laser technologies to make
distance measurements.
•
Phase Technology
: A technique for measuring distances that
uses a laser beam with sinusoidally modulated optical power
being sent to a target. Comparing the incoming wavelength
with the phase of the outgoing light.
•
The device produces visible laser beams,
which are emitted from the instrument.
•
Class 2 laser product in accordance with:
“IEC60825: 2014 “Radiation safety of laser
products”.
Do not stare into the laser beam or direct it towards other
people unnecessarily. Eye protection is normally afforded
by aversion responses including the blink reflex.
•
WARNING
Looking directly into the beam with optical aids
(e.g. binoculars, telescopes) can be hazardous.
•
CAUTION
Looking into the laser beam may be hazardous to the eyes.
Figure 1
**Draft B**
