LTI TruPoint 200h User’s Manual • Section 5 - Function Menu
Page 41
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
HUD Routine
1.
Select your target and look through the eyepiece, using the crosshair to aim to your target.
The HT icon
, the HD icon
, and “Shot 1" will appear in the display prompting you to
measure the Horizontal Distance to the “face” of the target.
2.
Press-and-hold the
button. The laser indicator
is displayed while the laser is active.
The laser will remain active for a maximum of 10 seconds while acquiring data about the target.
The measured horizontal distance appears briefly in the main display and then HT
,
Inclination icon
, degree symbol icon
are displayed along with the word ANG 1
prompting you to measure the inclination to base (or top) of the target.
3.
Press-and-hold the
button and aim to the base (or top) of the target. The measured
inclination appears in the main display and is updated as long as us you continue to
hold the
button. The measured inclination is “locked” when you release button.
The measured inclination appears briefly in the main display and then HT icon
, Inclination
icon
, and the degree symbol icon
are displayed along with the
word ANG 2 prompting you to measure the inclination to the top (or base) of the target.
4.
Press-and-hold the
button and aim to the top (or base) of the target. The measured
inclination appears in the main display and is updated as long as you continue to
hold the
button. The measured inclination is locked when you release the
button.
The measured inclination appears briefly in the main display and then the calculated
Height is displayed steady until you press any button or the unit powers OFF.
**Draft B**
