LTI TruPoint 200h User’s Manual • Section 4 - Settings Menu
Page 28
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Aiming Laser
The red laser pointer/dot is used for targeting to an object to obtain a measurement and be turned
off or on. The red laser is the phase laser technology. When the aiming laser is off, the pulse laser
technology can still obtain a measurement to a target.
•
The device produces visible laser beams, which are emitted from
the instrument. It is a Class 2 laser product in accordance with
IEC60825-1: 2014 Radiation safety of laser products.
•
Laser Class 2 product:
•
Do not stare into the laser beam or direct it towards other people
unnecessarily. Eye protection is normally afforded by aversion
responses including the blink reflex.
•
WARNING
•
Looking directly into the beam with optical aids
(e.g. binoculars, telescopes) can be hazardous.
•
CAUTION
•
Looking into the laser beam may be hazardous to the eyes.
To use the Aiming Laser:
1.
Long press the
button and use the
and
buttons to highlight
the Aiming Laser icon. AIMING LASER will be displayed in the lower message area.
2.
Press the
button to toggle the laser pointer setting on/off
•
ON
: Turns the laser pointer ON.
•
OFF
: Turns the laser pointer OFF.
3.
Press the Left Soft Key
to return to the main measurement screen. This does not select
an option and exits without saving the Aiming Laser setting option. The unit will return
to the last saved option.
4.
Press the Right Soft Key
to accept Aiming Laser setting option and will exit to
the main measurement screen.
NOTE: If the selection was off, the laser indicator in the main display
will have the OFF icon
.
**Draft B**
