LTI TruPoint 200h User’s Manual • Section 5 - Function Menu
Page 52
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Add/Subtract a Function Routine: Height, Missing Line, Area or Volume Values
The following is an example of the Area routine adding two values together. The other functions
(Height, Missing Line, and Volume) adding or subtracting values, the routine will be very similar.
1.
Enter the Add/Subtract Function menu from the steps above.
2.
Short press the
button and use the navigation buttons to highlight the Area icon
.
3.
Press the
button to enter the Area routine.
4.
Follow the Area routine
. The screen will have the Addition/Subtraction icon
in
the lower Right Soft Key and back arrow
in the Left Soft Key area.
5.
The first Area is calculated and the results are displayed. The Right Soft Key now displays
an “=” icon.
6.
Short press the Right Soft Key “=” to enter the Addition/Subtraction routine.
•
The following is the addition sequence. The subtraction sequence would be
the same except for subtracting the measurements from one another.
•
If a larger value is subtracted from a smaller value, a negative value will be calculated.
7.
The first Area is displayed with a “+” and
symbols to the left of the value, the Left Soft
Key is “+” symbol and the Right Soft Key is the Area icon
.
•
Short press the Left Soft Key to change from addition to subtraction symbols.
8.
Short press the Right Soft Key
and the screen will return to the Area function routine.
Take the second area measurements you want to add to the first value.
9.
Short press the Right Soft Key “=” to see the two area results added.
•
Press the Left Soft Key “+” to change from Addition to Subtraction and review results.
10. If another area needs to be added/subtracted, Short press the Right Soft Key
and
repeat the Area routine.
11. To exit the Add/Sub routine:
•
Short press the
button, navigate to the Addition/Subtraction icon
and
press the
button. The main measurement screen will be in the Area function
with the Addition/Subtraction function deactivated.
•
Short press the Right Soft Key “X” to exit the Area function and return to
main measure screen.
**Draft B**
