manualshive.com logo in svg

Laser Technology TruPoint 200h, User Manual

Share
Download
Laser Technology TruPoint 200h User Manual Download Page 33

LTI TruPoint 200h User’s Manual • Section 4 - Settings Menu

 Page 31

Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.

System Menu

 

1.

Long press the Settings 

 button and the 

 and 

 buttons to highlight 

the System Menu icon 

. SYSTEM will be displayed in the lower message area.

2.

Press the 

 button to enter the System menu. SYSTEM will be displayed in the upper 

message area. Use the 

 and 

 buttons to highlight the desired icon. The icon description 

will be displayed in the lower message area. Short press the 

 button to select the desired 

icon.

The System Menu includes five options used to set up the TruPoint 200h.

•

Data Recall 

•

HUD Aiming 

•

Favorites 

•

About 

•

Configuration 

3.

Press the Left Soft Key 

 to return to the Setting Menu screen. 

4.

Press the Right Soft Key 

 to return to the main measurement screen.

**Draft B**

Summary of Contents for TruPoint 200h





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands