LTI TruPoint 200h User’s Manual • Section 5 - Function Menu
Page 43
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
Button sequence during the height routine:
•
Pressing the back key
clears the last measurements (horizontal
or inclination) and allows you to reshoot that measurement.
•
Pressing the
button soft key, it will exit the HEIGHT Function
and goes to main measurement screen.
•
Press the
button to clear last measurement and to re-shoot the
previous point.
•
The laser is not active while measuring the ANG1 and ANG2 values.
As long as you hold the
button, the inclination reading is
displayed and updated as the aiming point changes. The measured
inclination is based upon the aiming point when you release
the
button.
•
When the height result is displayed, just press the
button
to start the routine and repeat the steps.
**Draft B**
