manualshive.com logo in svg

Laser Technology TruPoint 200h, User Manual

Share
Download
Laser Technology TruPoint 200h User Manual Download Page 17

LTI TruPoint 200h User’s Manual • Section 3 - Basic Operations

 Page 15

Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.

Backlight on Main Display

Long press the Backlight button 

 to turn on/off the backlight for the main display. 

Brightness in HUD

Heads-Up-Display (HUD) Brightness levels (1-5) can be changed two different ways:

In the Settings menu:

1.

Long press the 

 button.

2.

Navigate to the HUD Bright icon 

. 

The current brightness level will be displayed. 
Example: HUD BRIGHT [2].

3.

Short press the 

 button to change the level.

4.

Once the brightness level is selected, press the Right Soft Key 

 to accept.

•

To exit and not save the selected level, press the Left Soft Key 

.

•

When the TruPoint 200h is powered OFF and then back on, 
the backlight will be off, and it must be turned back on.

•

The LCD Backlight flashes as a light notification when a 
measurement is made, or any notification required.

**Draft B**

Summary of Contents for TruPoint 200h





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands