6: Basic Parameters
SLC™ 8000 Advanced Console Manager User Guide
65
Figure 6-3 Network > IP Filter Ruleset (Adding/Editing Rulesets)
Rulesets can be added or updated on this page.
2. Enter the following:
Rule Parameters
Ruleset Name
Name that identifies a filter; may be composed of letters, numbers, and hyphens
only. (The name cannot start with a hyphen.)
Example:
FILTER-2
IP Address(es)
Specify a single IP address to act as a filter.
Example:
172.19.220.64
– this specific IP address only
Subnet Mask
Specify a subnet mask to act determine how much of the address should apply to
the filter.
Example:
255.255.255.255
to specify the whole address should apply.
Protocol
From the drop-down list, select the type of protocol through which the filter will
operate. The default setting is All.
