8: Device Ports
SLC™ 8000 Advanced Console Manager User Guide
132
4. Click the right
arrow. The host displays in the Hosts box.
5. Repeat steps 2-4 to add more hosts to the host list.
Note:
To clear fields before adding the next host, click the
Clear Host Parameters
button.
6. You have the following options:
-
To remove a host from the host list, select the host in the Hosts box and click the
left
arrow.
-
To give the host a higher precedence, select the host in the Hosts box and click the
up
arrow.
-
To give the host a lower precedence, select the host in the Hosts box and click the
down
arrow.
7. Click the
Add Host List
button. After the process completes, a link back to the
Device Ports >
Settings
page displays.
Escape Sequence
The escape character used to get the attention of the SSH or Telnet client. It is
optional, and if not specified, Telnet and SSH use their default escape character.
For Telnet, the escape character is either a single character or a two-character
sequence consisting of '^' followed by one character. If the second character is '?',
the DEL character is selected. Otherwise, the second character is converted to a
control character and used as the escape character.
For SSH, the escape character is a single character.