6: Basic Parameters
SLC™ 8000 Advanced Console Manager User Guide
67
Updating an IP Filter
To update an IP filter rule set:
1. From the
Network > IP Filter
page, the administrator selects the IP filter ruleset to be edited
and clicks the
Edit Ruleset
button to return to the
Network > IP Filter Ruleset (Adding/Editing
Rulesets)
page (see
Figure 6-3
).
2. Edit the information as desired and click the
Apply
button.
Deleting an IP Filter
To delete an IP filter rule set:
1. On the
Network > IP Filter
page, the administrator selects the IP filter ruleset to be deleted and
clicks the
Delete Ruleset
button.
IP Filter Commands
The following CLI commands correspond to the web page entries described above.
To enable or disable IP filtering for incoming network traffic:
set ipfilter state
To set IP filter mapping:
set ipfilter mapping <parameters>
Parameters
ethernet <1|2> state <disable>
ethernet <1|2> state <enable> ruleset <Ruleset Name>
deviceport <1..48> state <disable>
deviceport <1..48> state <enable> ruleset <Ruleset Name>
internal modem state <disable>
internal modem state <enable> ruleset <Ruleset Name>
usbport <U1|U2> state <disable>
usbport <U1|U2> state <enable> ruleset <Ruleset Name>
To set IP filter rules:
set ipfilter rules <parameters>
Parameters
add <Ruleset Name>
delete <Ruleset Name>
edit <Ruleset Name> <Edit Parameters>
Edit Parameters:
append
insert <Rule Number>
