11: User Authentication
SLC™ 8000 Advanced Console Manager User Guide
208
5. Click the
Apply
button.
Note:
You must reboot the unit before your changes will take effect.
Commands
These commands for the command line interface correspond to the web page entries described
above.
To configure the SLC unit to use to authenticate users who log in via the Web,
SSH, Telnet, or the console port:
set <one or more parameters>
Parameters
breakseq <1-10 Chars>
clearports <Port List>
dataports <Port List>
encrypt <
enable
|disable>
escapeseq <1-10 Chars>
listenports <Port List>
secret < Secret>
server1 <IP Address or Name>
server2 <IP Address or Name>
server3 <IP Address or Name>
state <enable|
disable
>
To set user group and permissions for users:
set group <default|power|admin>
To set permissions for users not already defined by the user rights group:
set permissions <Permission List>
where
<Permission List> is one or more of nt, sv, dt, lu, ra, sk, um, dp, do,
ub, rs, rc, dr, wb, sn, ad, md, sd
User Menus
Right to create a custom user menu for the CLI for LDAP users.
Web Access
Right to access Web-Manager.
Diagnostics &
Reports
Right to obtain diagnostic information and reports about the unit.
Firmware &
Configuration
Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects
Reboot & Shutdown
.
Internal Modem
Right to update internal modem settings.
Device Port
Operations
Right to control device ports.
Device Port
Configuration
Right to enter device port settings.
USB
Right to enter modem settings for USB devices and control USB storage devices.
SD Card
Right to enter settings for SD card.