Lantronix SLC 8000 User Manual Download Page 252

Page: 252 / 337

12: Maintenance

SLC™ 8000 Advanced Console Manager User Guide

252

Figure 12-14 Maintenance > LCD/Keypad

To configure the LCD:

The screens that are currently enabled are displayed in order in the left Enabled screens list.

1. Select a screen to be removed from the

Enabled Screens

and click the

button. The

screen moves to the

Disabled Screens

list to the right.

2. Select a screen to be added from the

Disabled Screens

list and click the

button. The

screen is added to the

Enabled Screens

to the left.

3. Select a screen in the

Enabled Screens

list and click the

button

to change the

order of the screens.

Note:

The User Strings screen displays the 2 lines defined by the User Strings - Line 1

and Line 2 fields. By default, these user strings are blank.

4. Click

Apply

to save.

To configure the Keypad:

1. Enter the following fields.

Keypad Locked

Select this to lock out any input to the keypad. The default is for
the keypad to be unlocked.

Summary of Contents for SLC 8000


















































































































































































































































































































































Search results

Summary of Contents for SLC 8000

Reviews:

Lantronix SLC 8000, User Manual, Page: 252 / 337

Search results

Summary of Contents for SLC 8000

Reviews: