12: Maintenance
SLC™ 8000 Advanced Console Manager User Guide
246
Status Commands
These commands for the command line interface correspond to the web page entries described
above.
To display device port modes and states for one or more ports:
show portstatus [deviceport <Device Port List or Name>] [email <Email
Address>]
You can optionally email the displayed information.
To display a snapshot of configurable parameters:
show sysconfig [display <basic|auth|devices>] [email <Email Address]
You can optionally email the displayed information.
Displays a report of all configurable parameters or a shorter report with basic system settings,
authentication settings, or device settings.
To generate a report for one or more ports:You can optionally email the displayed
information.
show portcounters [deviceport <Device Port List or Name>] [email <Email
Address>]
To display the overall status of all SLC units:
show sysstatus [email <Email Address>]
You can optionally email the displayed information.
To display a list of all current connections:
show connections [email <Email Address>]
You can optionally email the displayed information.
To provide details, e.g., endpoint parameters and trigger, for a specific connection:
show connections connid <Connection ID> [email <Email Address>]
You can optionally email the displayed information.
Note:
Use the basic
show connections
command to obtain the Connection ID.
Emailing Logs and Reports
The following logs and reports can be directly emailed to a specific individual or to Lantronix
Technical Support directly from the log page:
System Log (
Figure 12-4
)
Audit Log (
Figure 12-5
)