manualshive.com logo in svg

Lantronix SLC 8000, User Manual

The Lantronix SLC 8000 is a robust and versatile device that allows for secure remote management of your network infrastructure. Ensure smooth setup and operation with the detailed Quick Start Manual. Simply visit our website to download this essential manual for free, enabling you to get the most out of your SLC 8000.

Share
Download
background image

SLC™ 8000 Advanced Console Manager User Guide

39

4: Quick Setup

This chapter helps get the IP network port up and running quickly, so you can administer the SLC 
advanced console manager using your network. 

Recommendations

To set up the network connections quickly, we suggest you do one of the following:

Use the front panel LCD display and keypads.

Complete the quick setup (see 

Figure 4-5) 

on the web interface.

SSH to the command line interface and follow the Quick Setup script on the command line 
interface.

Connect to the console port and follow the Quick Setup script on the command line interface.

Note:

The first time you power up the SLC unit, Eth1 tries to obtain its IP address via 

DHCP. If you have connected Eth1 to the network, and Eth1 is able to acquire an IP 
address, you can view this IP address on the LCD or by running the Lantronix 
DeviceInstaller™ application. If Eth1 cannot acquire an IP address, you cannot use 
Telnet, SSH, or the web interface to run Quick Setup.

IP Address

Your SLC 8000 advanced console manager must have a unique IP address on your network. The 
system administrator generally provides the IP address and corresponding subnet mask and 
gateway. The IP address must be within a valid range, unique to your network, and in the same 
subnet as your PC.

The following table lists the options for assigning an IP address to your SLC unit.

Table 4-1  Methods of Assigning an IP Address

Method

Description

DHCP 

A DHCP server automatically assigns the IP address and network settings. 
The SLC 8000 advanced console manager is DHCP-enabled by default.
With the Eth1 network port connected to the network, and the SLC unit 
powered up, Eth1 acquires an IP address, viewable on the LCD.
At this point, you can use SSH to connect to the SLC console manager or use 
the web interface.

BOOTP

Non-dynamic predecessor to DHCP.

Front panel LCD display 
and keypads

You manually assign the IP address and other basic network, console, and 
date/time settings. If desired, you can restore the factory defaults.

Serial port login to 
command line interface

You assign an IP address and configure the SLC unit using a terminal or a PC 
running a terminal emulation program to the SLC serial console port 
connection. 

Summary of Contents for SLC 8000


















































































































































































































































































































































Reviews:

No comments

Related manuals for SLC 8000

Eaton xStorage Home User Interface Manual preview
xStorage Home
Brand: Eaton Pages: 18
Eaton Cutler-Hammer IQ DP-4000 Installation, Operation And Maintenance Instructions preview
Cutler-Hammer IQ DP-4000
Brand: Eaton Pages: 87
Onn ONA17AA015 Product Manual preview
ONA17AA015
Brand: Onn Pages: 11
Aiphone LEF-3L Specifications preview
LEF-3L
Brand: Aiphone Pages: 2
Simplex F18804 Installation Instructions Operating Instructions preview
F18804
Brand: Simplex Pages: 40
Transmitter Solutions iCE--Entry--R Installation Manual preview
iCE--Entry--R
Brand: Transmitter Solutions Pages: 50
Cyrus CD7 User Instructions preview
CD7
Brand: Cyrus Pages: 6
Velux KUX 100 Instructions Manual preview
KUX 100
Brand: Velux Pages: 11
Fenix HERCULES 6.5 Instructions Manual preview
HERCULES 6.5
Brand: Fenix Pages: 24
Global Lift Rotational R-450A User Manual preview
Rotational R-450A
Brand: Global Lift Pages: 49
Alarmtec 4.3" Video Door Phone User Manual preview
4.3" Video Door Phone
Brand: Alarmtec Pages: 14
Fermax Kit Audio MINI 4+N Installation Instructions preview
Kit Audio MINI 4+N
Brand: Fermax Pages: 2
JETI model DUPLEX REX3 User Manual preview
DUPLEX REX3
Brand: JETI model Pages: 64
SoundMax SM- MSD11 Instruction Manual preview
SM- MSD11
Brand: SoundMax Pages: 43
Vents PA 01 W User'S Operation Manual preview
PA 01 W
Brand: Vents Pages: 20
Reechcraft PowerMAST Operators Safety Manual preview
PowerMAST
Brand: Reechcraft Pages: 56
Raven SCS 660 Installation & Service Manual preview
SCS 660
Brand: Raven Pages: 60
TMEZON MZ-IP-V739W Operation Instructions Manual preview
MZ-IP-V739W
Brand: TMEZON Pages: 29

Brands by name

Popular brands

Load more brands