manualshive.com logo in svg

Lantronix SLC 8000, User Manual

The Lantronix SLC 8000 is a robust and versatile device that allows for secure remote management of your network infrastructure. Ensure smooth setup and operation with the detailed Quick Start Manual. Simply visit our website to download this essential manual for free, enabling you to get the most out of your SLC 8000.

Share
Download
background image

6: Basic Parameters

SLC™ 8000 Advanced Console Manager User Guide

59

2. Enter the following information:

Ethernet Interfaces (Eth1 and Eth2)

Note:

Configurations with the same IP subnet on multiple interfaces (Ethernet or PPP) 

are not currently supported.

Eth 1 Settings

  or 

Eth 2 Settings

Disabled:

 If selected, disables the network port. 

Obtain from DHCP:

 Acquires IP address, subnet mask, hostname and gateway 

from the DHCP server. (The DHCP server may not provide the hostname 
gateway, depending on its setup.) This is the default setting. If you select this 
option, skip to Gateway.

Obtain from BOOTP:

 Lets a network node request configuration information 

from a BOOTP "server" node. If you select this option, skip to Gateway.

Specify:

 Lets you manually assign a static IP address, generally provided by the 

system administrator.

IP Address 

(if specifying)

Enter an IP address that will be unique and valid on your network. There is no 
default. 

Enter all IP addresses in dot-quad notation. Do not use leading zeros in the 
fields for dot-quad numbers less than 100. For example, if your IP address is 
172.19.201.28, do not enter 028 for the last segment.

Note:

Currently, the SLC unit does not support configurations with the same IP 

subnet on multiple interfaces (Ethernet or PPP).

Subnet Mask

If specifying an IP address, enter the network segment on which the SLC unit 
resides. There is no default.

IPv6 Address

Address of the port in IPv6 format.

Note:

The SLC 8000 advanced console manager supports IPv6 connections for a 

limited set of services: the web, SSH, and Telnet.

IPv6 addresses are written as 8 sets of 4-digit hexadecimal numbers separated by 
colons. There are several rules for modifying the address. For example:

1234:0BCD:1D67:0000:0000:8375:BADD:0057

 may be shortened to 

1234:BCD:1D67::8375:BADD:57.

IPv6 Address
(Link Local)

An IPv6 address that is intended only for communications within the segment of a 
local network.

Mode

Select the direction (full duplex or half-duplex) and speed (10, 100, or 1000 Mbit) of 
data transmission. The default is Auto, which allows the Ethernet port to auto-
negotiate the speed and duplex with the hardware endpoint to which it is 
connected.

MTU

Specifies the maximum transmission unit (

MTU

) or maximum packet size of 

packets at the IP layer (OSI layer 3) for the Ethernet port. When fragmenting a 
datagram, this is the largest number of bytes that can be used in a packet.

Multicast

Displays the multicast address of the Ethernet port.

Enable IPv6

Select this box to enable the IPv6 protocol. Disabled by default.

Ethernet Bonding

Ethernet 1 and Ethernet 2 can be bonded to support redundancy (Active Backup), 
aggregation (802.3ad), and load balancing. Disabled by default. Note that if 
Ethernet Bonding is enabled, assigning individual IP Addresses to Device Ports is 
not supported.

Summary of Contents for SLC 8000


















































































































































































































































































































































Reviews:

No comments

Related manuals for SLC 8000

GE Spacemaker 7-5400 User Manual preview
Spacemaker 7-5400
Brand: GE Pages: 12
Samsung MM-N7 Service Manual preview
MM-N7
Brand: Samsung Pages: 22
ZETRON MAX Connection Manual preview
MAX
Brand: ZETRON Pages: 3
FAAC 4400 Installation Instructions Manual preview
4400
Brand: FAAC Pages: 36
VacPak-It SVC100 Quick Start Manual preview
SVC100
Brand: VacPak-It Pages: 9
Magnavox MME100 - Audio Micro System User Manual preview
MME100 - Audio Micro System
Brand: Magnavox Pages: 23
Perma PRO 250 Operator'S Manual preview
PRO 250
Brand: Perma Pages: 26
Tyco Fire Product Star SuperNova S126 Instruction Manual preview
Star SuperNova S126
Brand: Tyco Fire Product Pages: 4
Lincoln SKF TLMR 101 Original Operating Instructions preview
SKF TLMR 101
Brand: Lincoln Pages: 40
Handicare SystemRoMedic EvaDrive450 Service Manual preview
SystemRoMedic EvaDrive450
Brand: Handicare Pages: 37
Memorex MX4118 Specifications preview
MX4118
Brand: Memorex Pages: 2
Digital Equipment StorageWorks DS-BA35X-MN Installation Manual preview
StorageWorks DS-BA35X-MN
Brand: Digital Equipment Pages: 2
WALTCO GTSL Tech Manual preview
GTSL
Brand: WALTCO Pages: 39
Autopot SmartPot 8 XL Set-Up Manuallines preview
SmartPot 8 XL
Brand: Autopot Pages: 2
EasyLine RM-208 CB.13.01 Operating And Installation Instructions preview
RM-208 CB.13.01
Brand: EasyLine Pages: 16
Ferguson HearMe CD250BT Instruction Manual preview
HearMe CD250BT
Brand: Ferguson Pages: 13
vistaCNC Mach III P1A Manual preview
Mach III P1A
Brand: vistaCNC Pages: 6
auna multimedia Graceland Manual preview
Graceland
Brand: auna multimedia Pages: 26

Brands by name

Popular brands

Load more brands