5: Commands and Levels
PremierWave® 2050 Enterprise Wi-Fi® IoT Module Command Reference
70
default start character
Defaults the accept mode start character.
default tcp keep alive
Defaults the TCP keep alive time.
default tcp keep alive interval
Restores the default 45 second accept mode TCP keep
alive timeout.
default tcp keep alive probes
Defaults the TCP keep alive probes.
email connect
<number>
Sets an email profile to use to send an email alert upon
establishing an accept mode tunnel. <number> = the
number of the email profile to use.
email disconnect
<number>
Sets an email profile to use to send an email alert upon
closing an accept mode tunnel. <number> = the number
of the email profile to use.
exit
Returns to the tunnel level.
flush serial disable
Characters already in the serial data buffer are retained
upon establishing an accept mode tunneling connection.
flush serial enable
Flushes the serial data buffer upon establishing an accept
mode tunneling connection.
flush start character disable
Enables forwarding of the accept start character into the
network.
flush start character enable
Disables forwarding of the accept start character into the
network.
initial send binary
<binary>
Sets the accept tunnel Initial Send text allowing for binary
characters. <binary> = string in binary format that will be
sent out the network upon connection. Within [] use binary
decimal up to 255 or hex up to 0xFF.
initial send set
<text>
Sets the accept tunnel Initial Send text. <text> = ascii
string that will be sent out the network upon connection.
kill connection
Disconnects the active accept mode tunneling connection.
local port
<number>
Sets the port to use for accept mode tunneling. <number>
= number of the port to use.
no aes decrypt key
Removes the accept tunnel AES decrypt key.
no aes encrypt key
Removes the accept tunnel AES encrypt key.
no credentials
Clears the RSA/DSA certificate selection for the SSL
server.
no email connect
Discontinues sending email alerts upon establishing an
accept mode tunnel.
no email disconnect
Discontinues sending email alerts upon closing an accept
mode tunnel.
no initial send
Removes the accept tunnel Initial Send string.
password
Enters the next lower level.
protocol ssh
Uses SSH protocol for accept mode tunneling.
protocol ssl
Uses SSL protocol for accept mode tunneling.
protocol tcp
Uses TCP protocol for accept mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for accept mode
tunneling.
protocol telnet
Uses Telnet protocol (with IAC) for accept mode tunnel-
ing.
secure protocols ssl3 disable
Disables the protocol.
secure protocols ssl3 enable
Enables the protocol.
secure protocols tls1.0 disable
Disables the protocol.