Lantronix PremierWave 2050 Command Reference Manual Download Page 128

Page: 128 / 428

5: Commands and Levels

PremierWave® 2050 Enterprise Wi-Fi® IoT Module Command Reference

128

timeout

<seconds>

Sets the Ping response timeout in seconds.

write

Stores the current configuration in permanent memory.

failover (config-ethernet-failover:eth0) level commands

clrscrn

Clears the screen.

default failback threshold

Restores the default Failback threshold.

default failover interface

Restores the default Failover interface.

default failover threshold

Restores the default Failover threshold.

default interval

Restores the default Ping interval.

default method

Restores the default ping method.

default timeout

Restores the default Ping response timeout.

exit

Exit back to interface configuration level

failback threshold

<pings>

Sets the Failback threshold. If <pings> attempts are an-
swered, the device will Failback to original interface.

failover interface

<text>

Sets the Failover interface.

failover threshold

<pings>

Sets the Failover threshold. If <pings> attempts go unan-
swered, the device will Failover to selected interface.

hostname

<text>

Sets the host name. <text> = name of the host to ping.

interval

<seconds>

Sets the Ping interval in seconds.

method icmp

Ping using ICMP-ECHO.

method tcp

Ping using TCP.

no hostname

Clears the host name.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current
CLI session.

show status

Show failover status

state disable

Disables Failover.

state enable

Enables Failover.

test

Test failover configuration

timeout

<seconds>

Sets the Ping response timeout in seconds.

write

Stores the current configuration in permanent memory.

filesystem (filesystem) level commands

cat

<file>

Show the contents of a file

<directory>

Change the current directory to the specified directory

clrscrn

Clears the screen.

<source file>

<destination file>

Copy an existing file

dump

<file>

Show contents of a file as a hex dump

exit

Exits to the enable level.

format

Format the file system and lose all data

Show all files and directories in the current directory

<directory>

Show all files and directories in the specified directory

mass storage

Enters the next lower level.

mkdir

<directory>

Create a directory

<source file>

<destination file>

Move a file on the file system

pwd

Print working directory

Summary of Contents for PremierWave 2050













































































































































































































































































































































































































































Search results

Summary of Contents for PremierWave 2050

Reviews:

Related manuals for PremierWave 2050

Brands by name

Popular brands

Lantronix PremierWave 2050, Command Reference Manual

Search results

Summary of Contents for PremierWave 2050

Reviews:

Related manuals for PremierWave 2050

Brands by name

Popular brands