Lantronix PremierWave 2050 Command Reference Manual Download Page 89

Page: 89 / 428

5: Commands and Levels

PremierWave® 2050 Enterprise Wi-Fi® IoT Module Command Reference

block serial enable

Discards all data coming in from the serial interface before
forwarding it to the connect mode tunnel (generally used
for debugging).

clrscrn

Clears the screen.

connect mode always

Enables the tunneling server to always establish tunneling
connections.

connect mode any character

Enables the tunneling server to establish a tunneling con-
nection when a character is received on the correspond-
ing line (serial port).

connect mode disable

Disables connect mode tunneling.

connect mode modem control asserted

Enables the tunneling server to make tunneling connec-
tions when the modem control pin is asserted.

connect mode modem emulation

Enables modem emulation for connect mode tunneling.

connect mode start character

Enables connect mode tunneling when the configured
start character is received on the line.

default connect mode

Restores the default connect mode as 'disable'.

default host mode

Connects to the first host in the list that accepts the con-
nection.

default local port

Uses a random port number as the local port for establish-
ing tunneling connections to other devices.

default reconnect time

Restores the default reconnect time value for connect
mode tunneling.

default start character

Defaults the connect mode start character.

email connect

<number>

Sets an email profile to use to send an email alert upon
establishing a connect mode tunnel. <number> = the
number of the email profile to use.

email disconnect

<number>

Sets an email profile to use to send an email alert upon
closing a connect mode tunnel. <number> = the number
of the email profile to use.

exit

Returns to the tunnel level.

flush serial disable

Characters already in the serial data buffer are retained
upon establishing a connect mode tunneling connection.

flush serial enable

Flushes the serial data buffer upon establishing a connect
mode tunneling connection.

flush start character disable

Enables forwarding of the connect start character into the
network.

flush start character enable

Disables forwarding of the connect start character into the
network.

host

<instance>

Enters the next lower level. Specify the instance for the
next lower level.

host mode sequential

Connects to the first host in the list that accepts the con-
nection.

host mode simultaneous

Selects simultaneous connections to all hosts on the host
list.

kill connection

Disconnects the active connect mode tunneling connec-
tion or connections.

local port

<number>

Sets a specific port for use as the local port. <number> =
the number of the port to use.

no email connect

Discontinues sending email alerts upon establishing a
connect mode tunnel.

Summary of Contents for PremierWave 2050













































































































































































































































































































































































































































Search results

Summary of Contents for PremierWave 2050

Reviews:

Related manuals for PremierWave 2050

Brands by name

Popular brands

Lantronix PremierWave 2050, Command Reference Manual

Search results

Summary of Contents for PremierWave 2050

Reviews:

Related manuals for PremierWave 2050

Brands by name

Popular brands