Lantronix PremierWave 2050 Command Reference Manual Download Page 371

Page: 371 / 428

5: Commands and Levels

PremierWave® 2050 Enterprise Wi-Fi® IoT Module Command Reference

371

CLI session.

usb auto mount disable

Disables automatic mount of connected USB drives.

usb auto mount enable

Enables automatic mount of connected USB drives.

write

Stores the current configuration in permanent memory.

modbus (modbus) level commands

additional port

<number>

Sets an additional TCP server port.

clrscrn

Clears the screen.

default response timeout

Restores the default Modbus Response Timeout.

exit

Exits to the config level.

kill connection

<index>

Kills modbus connection selected by index from show
connections.

no additional port

Removes the additional TCP server port.

response timeout

<milliseconds>

Sets the Modbus Response Timeout in milliseconds.

rss

Enters the next lower level.

show

Displays the current configuration.

show connections

Displays connections.

show history

Displays the last 20 commands entered during the current
CLI session.

show statistics

Displays statistics.

tcp server state disable

Disables the Modbus TCP Server.

tcp server state enable

Enables the Modbus TCP Server.

write

Stores the current configuration in permanent memory.

modem (tunnel-modem:4) level commands

clrscrn

Clears the screen.

connect string

<text>

Sets the CONNECT string used in modem emulation.
<string> = connect string.

default incoming connection

Default disables incoming network connections.

default response type

Default uses text type responses.

display remote ip disable

The incoming RING has nothing following it.

display remote ip enable

The incoming RING is followed by the IP address of the
caller.

echo commands disable

Does not echo modem commands.

echo commands enable

Echoes modem commands.

echo pluses disable

Does not echo the +++ characters when entering modem
command mode.

echo pluses enable

Echoes the +++ characters when entering modem com-
mand mode.

error unknown commands disable

Returns OK on unknown AT commands.

error unknown commands enable

Returns an error upon unknown AT commands.

exit

Returns to the tunnel level.

incoming connection automatic

Automatically answer incoming network connections.

incoming connection disabled

Disable incoming network connections.

incoming connection manual

Wait for an ATA command before answering an incoming
network connection.

no connect string

Removes optional CONNECT string information for mo-

Summary of Contents for PremierWave 2050













































































































































































































































































































































































































































Search results

Summary of Contents for PremierWave 2050

Reviews:

Related manuals for PremierWave 2050

Brands by name

Popular brands

Lantronix PremierWave 2050, Command Reference Manual

Search results

Summary of Contents for PremierWave 2050

Reviews:

Related manuals for PremierWave 2050

Brands by name

Popular brands