Lantronix PremierWave 2050 Command Reference Manual Download Page 400

Page: 400 / 428

5: Commands and Levels

PremierWave® 2050 Enterprise Wi-Fi® IoT Module Command Reference

400

default read-only privacy protocol

Restores to default SNMPv3 read-only privacy encryption
method: DES for agent.

default read-only security

Restores to default SNMPv3 read-only security method:
Authentication, No Privacy for agent.

default security

Restores to default SNMPv3 security method: Authentica-
tion, No Privacy for agent.

default system description

Restores the SNMP system description to its default.

default system name

Restores the SNMP system name to default: the product
name.

default version

Restores to default SNMP version v2c for agent.

default write community

Clears the SNMP read/write community to default: private

exit

Exits to the next higher level.

no authentication password

Clears authentication password for agent.

no privacy password

Clears privacy password for agent.

no read-only authentication password

Clears read-only authentication password for agent.

no read-only privacy password

Clears read-only privacy password for agent.

no read-only username

Clears SNMPv3 read-only username for agent.

no system contact

Clears the SNMP system contact.

no username

Clears SNMPv3 username for agent.

port

<number>

Sets the SNMP agent port.

privacy password

<text>

Sets password used for privacy encryption for agent.

privacy protocol aes

Uses AES for privacy encryption for agent.

privacy protocol des

Uses DES for privacy encryption for agent.

read community

<text>

Sets the SNMP read-only community string. <text> =
name of the read-only community string to be set.

read-only authentication password

<text>

Sets password used for read-only authentication for
agent.

read-only authentication protocol md5

Uses MD5 for read-only authentication for agent.

read-only authentication protocol sha

Uses SHA for read-only authentication for agent.

read-only privacy password

<text>

Sets password used for read-only privacy encryption for
agent.

read-only privacy protocol aes

Uses AES for read-only privacy encryption for agent.

read-only privacy protocol des

Uses DES for read-only privacy encryption for agent.

read-only security authentication and privacy

Authentication and Privacy for agent.

read-only security authentication but no privacy

Authentication, No Privacy for agent.

read-only security no authentication and no priv

No Authentication, No Privacy for agent.

read-only username

<text>

Sets SNMPv3 read-only username for agent.

security authentication and privacy

Authentication and Privacy for agent.

security authentication but no privacy

Authentication, No Privacy for agent.

security no authentication and no priv

No Authentication, No Privacy for agent.

show

Shows the current configuration.

show engine id

Displays the SNMP agent engine ID.

show history

Displays the last 20 commands entered during the current
CLI session.

state disable

Disables the SNMP agent.

Summary of Contents for PremierWave 2050













































































































































































































































































































































































































































Search results

Summary of Contents for PremierWave 2050

Reviews:

Lantronix PremierWave 2050, Command Reference Manual, Page: 400 / 428

Search results

Summary of Contents for PremierWave 2050

Reviews: