![background image](http://html2.mh-extra.com/html/landice/l7-club/l7-club_service-manual_3548044091.webp)
Impact Absorbers
Repair Procedures
91
7.21. Impact Absorbers
1. Remove the deck as outlined in “Deck and Treadbelt” on page
90.
2. Using vice grips (locking pliers), lock them around the tip of the deck post. Turn the pliers counterclockwise to
remove the deck post. See the following figure. There are two types of impact absorbers depending on the
treadmill model:
• L7: The post has no spacer.
• L8 and L9: The post has a nylon spacer.
Figure 7-26.
Impact Absorbers
3. For L7 models only: Remove the guides (see the following figure) from the deck and reinstall on either the new
deck or the reverse side of the existing deck, as applicable.
Figure 7-27.
Treadbelt Guides - L7 Only
Note:
The nylon spacer is not removed from the post. If the nylon spacer is damaged, replace the post.
4. Slide the impact absorber and load washer off of each post.
L7
L8 and L9
Post
Load Washer
Impact Absorber
Load Washer
Impact Absorber
Post with Nylon
Spacer
Summary of Contents for L7 Club
