![background image](http://html2.mh-extra.com/html/landice/l7-club/l7-club_service-manual_3548044068.webp)
Repair Procedures
Lower Control Panel Electronics
68
7.3.
Lower Control Panel Electronics
The lower control panel contains a few electronic components, See “Electronic Assemblies - Upper Assembly All
Models” on page
17 The entire lower control panel does not need to be removed from the handle assembly to
replace the components.
1. Unplug the treadmill from its outlet.
2. Remove the four screws that secure the lower control panel upper to the handle assembly as shown in the fol
-
lowing figure.
Figure 7-3.
Lower Control Panel Upper
3. Carefully lift the upper so as not to pull any of the wires or connectors. Rotate it until it is upside-down and rest it
on the lower panel frame.
4. Disconnect the component to be replaced from the harness.
5. Remove the component to be replaced from the lower control panel, see the following figure.
Screws
Lower
Control Panel
upper
Summary of Contents for L7 Club
