![background image](http://html2.mh-extra.com/html/landice/l7-club/l7-club_service-manual_3548044034.webp)
Adjustments
Treadbelt Tensioning
34
Figure 5-4.
Treadbelt Tensioning Screws
To tighten treadbelt, turn both adjustment bolts (clockwise) exactly the same amount to maintain proper tracking.
Failure to turn them equally will affect belt tracking. You are moving the take-up roller closer or further away from the
deck to tension the treadbelt.
Figure 5-5.
Treadbelt Tension Check
CAUTION
CAUTION
DO NOT OVER TIGHTEN TREADBELT! If you cannot reach the palm of the hand under
the center of the Treadbelt (see the following figure), if the edges of the belt are curled
up, or if you hear the belt “groaning” THE TREADBELT IS TOO TIGHT.
CAUTION
CAUTION
Treadbelt and deck surface should always be replaced together if either is worn.
Summary of Contents for L7 Club
