![background image](http://html2.mh-extra.com/html/landice/l7-club/l7-club_service-manual_3548044077.webp)
Choke
Repair Procedures
77
7.11. Choke
Note:
This applies to Club models only that use the SCR MCB.
1. Unplug the treadmill from its outlet.
2. Remove the motor cover.
3. Disconnect all wires from the choke.
4. Connect the replacement choke as outlined in Table 7-4.
Table
7-3
SCR MCB Connections
Contact/Connector
Destination
Clip with Blue, Orange, Brown, Red,
Black, and White wires
to Elevation Motor
Clip with Red, Green, and Black wires
to Speed Sensor on Drive Motor
Black (MTR) and White (MTR) wires
to Drive Motor
Red wire
to Choke
Green wire
to Ground on Frame
Black wire
to Capacitor (+)
White wire
to Capacitor (-)
Clip with Green and Black wires
to Upper Display
Clip with Red, Blue, White, and Orange
wires
to Control Panel
Table
7-4
Choke Connections
Contact/Connector
Destination
Red wire
to SCR MCB
Purple wire
to SCR MCB
Summary of Contents for L7 Club
