Safety Information
2
Safety Information
DANGER
To reduce the risk of electric shock: always unplug the treadmill from the electrical
outlet immediately after using and before cleaning.
DANGER
Always unplug the treadmill before cleaning or removing the motor cover.
DANGER
Improper connection of the grounding connector can result in risk of electric shock.
Check with a qualified electrician/service technician if you are in doubt as to whether
the treadmill is properly grounded. Do not modify the plug provided with the treadmill.
If the plug will not fit in the outlet, have a proper electrical outlet installed by a qualified
electrician.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons:
• An appliance should never be left unattended when plugged in. Unplug from outlet when not in
use, and before putting on or taking off parts.
• Close supervision is necessary when the treadmill is used by or near children or persons with
disabilities.
• Use the treadmill only for its intended use as described in this manual. Do not use attachments not
recommended by Landice.
• Never operate treadmill if it has a damaged cord or plug, if it is not working properly, or if it has
been damaged. Call your dealer or certified service provider immediately for examination and
repair.
• Keep the power cord away from heated surfaces. Be sure the cord has plenty of slack and cannot
be pinched under the treadmill when it elevates and de-elevates.
• Never operate the treadmill with the motor cover air openings blocked. Keep the air openings free
of lint, hair, dust, or debris.
• Do not drop or insert objects into any opening on the treadmill. Be sure no objects are near or
beneath the treadbelt when you are using the treadmill.
• Do not use treadmill outdoors.
• Do not operate treadmill where aerosol (spray) products are being used or where oxygen is being
administered.
• To disconnect, press
STOP
twice, pull the safety lanyard out, then remove plug from outlet.
Summary of Contents for L7 Club
