![background image](http://html2.mh-extra.com/html/landice/l7-club/l7-club_service-manual_3548044087.webp)
Drive Roller
Repair Procedures
87
7.19. Drive Roller
1. Loosen the take-up roller to provide slack in the treadbelt.
2.
Loosen treadbelt tens
i
on using a 9/16” socket and 3/8" ratchet at the adjustment bolts located as shown in the
following figure.
Figure 7-22.
Treadbelt Tensioning Bolts
3.
Turn treadmill ON and elevate it to 15% grade
.
4.
Turn treadmill OFF
and
unplug its power cord from wall outlet.
5. Remove motor cover as outlined in “Motor Cover” on page
6. Disconnect the upper harness connectors and ground wire, if applicable, from the lower board and make sure
that it can be removed with the upright in the next step.
Summary of Contents for L7 Club
