![background image](http://html2.mh-extra.com/html/landice/l7-club/l7-club_service-manual_3548044086.webp)
Repair Procedures
Take-up Roller
86
7.18. Take-up Roller
1. Remove the motor cover.
2. Remove the screws from the rail covers as shown in the following figure.
Figure 7-20.
Side Rail Cover (same for left side)
3. Using a rubber mallet, gently tap up on the rail to remove it. Repeat for left side.
4. Remove the drive belt as outlined in “Drive Belt” on page
5. Use a 9/16” socket and ratchet to remove the bolts from the take-up roller on both sides.
Figure 7-21.
Treadbelt Tensioning Screws
6. Remove the take-up roller.
7. Installation is the reverse of removal.
Side Track
Screws
Summary of Contents for L7 Club
