![background image](http://html2.mh-extra.com/html/landice/l7-club/l7-club_service-manual_3548044085.webp)
Drive Belt
Repair Procedures
85
7.17. Drive Belt
1. Use a 7/16” deep well socket to loosen the drive belt tensioning nut, as shown in the following figure, until there
is slack in the belt.
Figure 7-19.
Drive Belt Tensioning Bolt
2. Follow the instructions in “Drive Roller” on page
87 to the point that the drive belt can be removed from the drive
roller.
3. Slide the belt off both pulleys.
4. Installation is reverse of removal.
5. Tension the drive belt as outlined in “Drive Belt Tension” on page
31.
Tensioning Screw
Tensioning Nut
Saddle
Foam block
Summary of Contents for L7 Club
