KYOWA WGA-680A Series Instruction Manual Download Page 9 | Manualshive

Page: 9 / 61

background image

IM-A-1048H

8

1. OUTLINE OF PRODUCT

1-1. OUTLINE

The WGA-680A Instrumentation Amplifier is a high-speed and sophisticated amplifier, designed to be used for
displaying physical quantities (load, etc.) with strain gage transducers.
The WGA-680A is able to be operated from the keys on the front panel, and includes various functions
(comparator functions, hold functions, D/A conversion functions, etc.) as standard equipment.
The WGA-680A is applicable for wide range of measurements and controlling functions: high-speed
phenomenon measurements to be required for high-speed sampling such as press-fitting and pressing, or load
measurement to be required for high-resolution.
The WGA-680A has the optional models; BCD/TEDS model, RS-232C/TEDS model, RS-485/TEDS model, and
CC-Link model. The CC-Link model is able to be controlled by PLC.

1-2. FEATURES

LEDs Numerical values and the comparator lights up in red, green, and orange, dependently on the status.
High-speed sampling : 4000 times/sec.
High-speed D/A conversion : 4000 times/sec.

Equips with 4 comparators.
HH comparator, HI comparator, LO comparator, LL comparator
Each comparator selects the "High limit" or "Low limit".
Saves 4 patterns of comparator value, and switches them.
Various hold functions:
Arbitrary point hold, peak hold, bottom hold, peak-to-peak hold
Indicated value: -99999 to 99999 (5 digits)
3 calibration functions:
Actual load calibration, Sensitivity registering calibration, Numeric value registering calibration
Various optional models:
BCD/TEDS model, RS-232C/TEDS model, RS-485/TEDS model, CC-Link model

1-3. MODEL

The WGA-680A series has 8 models. Customers are required to purchase the power cable applied for your power supply
specifications.

Model

Option

Power supply specs

WGA-680A-00

None

AC models

Power supply

AC100 to 240V

frequency

50/60Hz

Power consumption

20VA or less

WGA-680A-01

BCD/TEDS

WGA-680A-02

RS-232C/TEDS

WGA-680A-03

RS-485/TEDS

WGA-680A-04

CC-Link

WGA-680A-10

None

DC models

Power supply

DC10 to 30V

Power consumption

10W or less

WGA-680A-11

BCD/TEDS

WGA-680A-12

RS-232C/TEDS

WGA-680A-13

RS-485/TEDS

WGA-680A-14

CC-Link

«
...
7
8
9
10
11
...
»

Summary of Contents for WGA-680A Series






























































Reviews:

No comments

Related manuals for WGA-680A Series

Brand: JBL Pages: 8

Brand: AAVIK Pages: 8

Brand: Yamaha Pages: 16

Brand: Yamaha Pages: 16

Brand: Yamaha Pages: 8

THR30II Wireless

Brand: Yamaha Pages: 2

Brand: Yamaha Pages: 150

Brand: Yamaha Pages: 16

Brand: DUB Edition Pages: 18

Brand: Mark Pages: 12

Brand: Sansui Pages: 30

Brand: E&I Pages: 9

Cat-5 Computer Video Receiver DA1921SX

Brand: Altinex Pages: 9

Brand: FAME Pages: 8

Brand: Extron electronics Pages: 2

Brand: Hyundai Pages: 19

Brand: Induction Dynamics Pages: 4

Brand: Nova Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands