IM-A-1048H
30
The display mode (normal display mode or hold display mode) is invalid. The WGA-680A constantly
displays the latest measured value.
When selecting the "Hold comparison mode", the WGA-680A compares values during the holding
interval only.
4-10-1. Arbitrary point hold
The WGA-680A holds the instantaneous value and displays it.
Key operation
The WGA-680A holds the instantaneous value, when the HOLD key is pressed and after the lapse of
delay time.
The WGA-680A holds the instantaneous value until the HOLD key is pressed again.
Control input
The WGA-680A holds the instantaneous value when the HOLD command is turned ON and after the lapse
of delay time.
The WGA-680A holds the instantaneous value until the HOLD command is turned OFF.
The WGA-680A works as follow during holding interval by turning ON/OFF the “HOLD command” and
“RESET command.”
NOTE
