IM-A-1048H
19
4-1-3. Key operations in FUNCTION SELECTING mode
To go to the FUNCTION SELECTING mode, press the FUNCTION key for 2 seconds in the
MEASURING mode. The "F-01" is displayed on the indicator and you are able to select functions.
To select the functions from "F-01" to "F-26" on the FUNCTION SELECTING mode, press the
key
or SHIFT +
key.
To determine the function, press the SET key. The mode goes to the SETTING mode.
To back to the MEASURING mode, press the CANCEL key on the FUNCTION SELECTING mode.
4-1-4. Key operations in SETTING mode
Press the SET key after selecting the function on the FUNCTION SELECTING mode, the mode goes to
the function’s SETTING mode.
To set numerical values.
Move digits
: Press the
Change numerical values
: Press the
key,
key + SHIFT key.
Register pre-set values
: Press the SET key.
The changed value is determined and stored (registered) in the
internal memory.
When numeric values are not required to set, "...." is displayed. Press the SET key in this status, the
function is executed.
To back to the FUNCTION SELECTING mode, press the CANCEL key on the SETTING mode.
To set numerical values.
(1)Setting available digit flickers.
(2)To move the target digit to the right, press the
key.
The flickering digit moves the leftmost digit next to the rightmost digit.
The leftmost digit (5th digit)
Other digit (1st to 4th digit)
(4)To set the decimal point, when the function is in the calibration function.
