Kyocera ECOSYS FS-2020D, Operation Manual

Page: 34 / 219

2-4 Paper Handling
Selecting the Right Paper
This section describes the guidelines for selecting paper.
Condition
Avoid using paper that is bent at the edges, curled, dirty, torn,
embossed, or contaminated with lint, clay, or paper shreds.
Use of paper in these conditions can lead to illegible printing and paper
jams, and can shorten the life of the machine. In particular, avoid using
paper with a surface coating or other surface treatment. Paper should
have as smooth and even a surface as possible.
Composition
Do not use paper that has been coated or surface-treated and contains
plastic or carbon. The heat of fusing can cause such paper to give off
harmful fumes.
Bond paper should contain at least 80% pulp. Not more than 20% of the
total paper content should consist of cotton or other fibers.
Paper Sizes
Cassettes and the MP Tray are available for the paper sizes shown
below. The dimensional tolerances are ±0.7mm for the length and width.
The angle at the corners must be 90° ±0.2°.
For FS-2020D/3920DN/4020DN:
MP Tray Size
Cassette or
MP Tray
Size
Envelope Monarch 3-7/8 x 7-1/2 inches Legal 8-1/2 x 14 inches
Envelope #10 4-1/8 x 9-1/2 inches Letter 8-1/2 x 11 inches
Envelope DL 110 x 220 mm ISO A4 148 x 297 mm
Envelope #9 3-7/8 x 8-7/8 inches ISO A5 148 x 210 mm
Envelope #6 3-5/8 x 6-1/2 inches ISO A6 105 x 148 mm
(FS-2020D: MP Tray
only)
JIS B6 128 x 182 mm Envelope C5 162 x 229 mm
Hagaki 100 x 148 mm ISO B5 176 x 250 mm
Ofuku-Hagaki 148 x 200 mm JIS B5 182 x 257 mm
Youkei 2 114 x 162 mm Executive 7-1/4 x 10-1/2 inches
Youkei 4 105 x 235 mm Oficio II 8-1/2 x 13 inches
Folio 210 x 330 mm
Statement 5-1/2 x 8-1/2 inches
16 kai 197 x 273 mm
Custom Cassette: 140 x 210 mm to 216 x 356 mm (FS-2020D); 105 x 148 mm
to 216 x 356 mm (FS-3920DN and FS-4020DN)MP Tray: 70 x 148
mm to 216 x 356 mm