Kyocera ECOSYS FS-2020D, Operation Manual

Page: 162 / 219

7-62 Using the Operation Panel
Duplex (Duplex printing error detection setting)
If the error detection setting for duplex printing has been turned
On
, and
you attempt to print onto a paper size and paper type that cannot be
used for duplex printing, the
Duplex disabled Press GO
error
message will be displayed and printing will stop. The default settings is
Off
.
1
Press
Z
while
>Error Handling >
is displayed.
2
Press U or V repeatedly until
>>Duplex
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using U or V .
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Paper Mismatch (Detection settings for paper size/type errors
when the paper source is fixed)
This interrupts printing by indicating
Paper Mismatch
when the paper
sizes and/or types do not match between a print job and a paper source.
This can be disabled if you want to continue printing even if the paper
size or type you specified is different from the fixed paper source. The
default setting is
On
.
1
Press Z while
>Error Handling >
is displayed.
2
Press
U
or
V
repeatedly until
>>Paper Mismatch
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using
U
or
V
.
On: stops printing and an error message appears
Off: continues printing
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
On • To print onto one-side of the paper only when this
message is displayed, press
[GO] .
• Press [Cancel] to cancel the printing itself.
Off • To print onto one-side of the paper.
>>Duplex
? Off
Note This setting does not relate to the
Size Error
. The
Size
Error
will be indicated when the Paper Size Dial and the actual
paper size do not match. For details on
Size Error
, refer to Error
Message of Troubleshooting .
>>Paper Mismatch
? On