Kyocera ECOSYS FS-2020D, Operation Manual

Page: 57 / 219

Connecting and Printing 4-7
3
Press Z . Each time you press U or V , the selection changes. Refer
to the explanations below when specifying the settings.
If you are using
NetWare
,
AppleTalk
,
IPP
,
SSL Server
or
IPSec
to connect to a network, you must enter an administrator ID
and press [OK] . The default setting is the numeric part of your
printer's model name. If you use FS-2020D, enter "
2020
".
If you are using
NetWare
,
AppleTalk
,
IPP
,
SSL Server
or
IPSec
to connect to a network, you must enter an administrator
password and press [OK] . The default setting is the numeric part of
your printer's model name. If you use FS-2020D, enter "
2020
".
Set this item to
On
when you connect to a network using
NetWare
.
In submenu, frame mode can be selected from
Auto
,
802.3
,
Ethernet-II
,
SNAP
and
802.2
.
AppleTalk
must be activated (
On
) for networking with Macintosh
computers.
Set this item to
On
when you connect to a network using
IPP
.
Set this item to
On
when you connect to a network using
SSL
Server
. Submenu has items including
DES
,
3DES
,
AES
,
IPP over
SSL
and
HTTPS
.
Set this item to
On
when you connect to a network using
IPSec
.
Continued on next page.
ID
_
Password
_
>NetWare >
On
>AppleTalk
On
>IPP
Off
>SSL Server
Off
>IPSec
Off